Abbotsford Concrete applies Sika's complete floor-system lineup to warehouses, manufacturing plants, food processing facilities, and commercial spaces. SikaTop self-leveling underlayments flatten slabs before finish coats. SikaFloor epoxy and urethane topcoats deliver chemical resistance, forklift durability, ESD conductivity, and food-grade compliance. We spec the right system for your facility's actual demands, then install to Sika's engineering standard. Free written estimate, firm timeline.
SikaFloor is not one product but a family of floor coatings, each engineered for different facility demands. SikaTop self-leveling products flatten uneven concrete slabs before the finish coat goes down, eliminating the need for grinding or patching. The SikaFloor topcoat system then sits on that prepared base, with options ranging from standard epoxy for general industrial use to urethane for chemical exposure, conductive formulations for electronics manufacturing, and food-grade urethane cement for processing plants.
Installation follows a strict sequence: substrate prep (grinding, cleaning, crack repair), primer application, body coat, optional aggregate broadcast for slip resistance, and topcoat at the engineered thickness. Each layer must cure per Sika spec before the next begins. The warranty covers both the material and the install process, which is why Sika-certified installers matter.
We walk the space and document traffic patterns, chemical exposure, temperature swings, and any specialty needs (ESD, food compliance, slip resistance). This assessment determines which SikaFloor system is the right fit.
Prepare the slab
Concrete is diamond-ground to the profile required by the chosen SikaFloor system. Old coatings, contaminants, and loose material are removed. Active cracks are injected with Sika repair material. The surface is then primed with the matched Sika primer.
Apply SikaFloor layers
The system is applied in sequence: primer, body coat, optional aggregate for anti-slip, and topcoat. Each layer cures to full strength before the next is applied. Thickness is verified at each stage to meet Sika spec.
Document and release
Installation records, material batch numbers, and cure schedule are documented for warranty support. The floor is handed off with maintenance guidelines and a Sika system warranty that covers both product and install integrity.
Specification discipline
Why System Selection Determines Success
A SikaFloor system rated for chemical spills but not forklift traffic will fail under wheel loads. A system engineered for heavy traffic but lacking chemical resistance will degrade under process spills. The match between the system and the facility's actual use is what separates a floor that lasts from one that fails early. This is why we assess before we spec.
ESD-conductive SikaFloor systems require resistance verification after install to confirm they meet your facility's electrostatic requirements. Food-grade urethane cement systems must integrate cove base and meet USDA/CFIA standards. Standard epoxy works for general warehouses and light manufacturing. The right system is the one that handles your specific conditions, not the cheapest option or the most popular one.
System choice, ESD, chemical resistance, warranty and facility match.
Based on the use, traffic, chemical exposure, and any specialty requirements (ESD, food-grade, anti-slip). We confirm the actual conditions during the assessment and recommend the matched system from the Sika range.
Yes, with the conductive/dissipative SikaFloor systems engineered for ESD-sensitive electronics manufacturing and clean rooms. The resistance range is verified after install.
Yes, Sika has urethane cement systems with cove base integration for USDA/CFIA-compliant food processing floors. Cross-reference with our food-grade compliant flooring service.
Yes when installed by a Sika-system installer to Sika spec. System warranty extends beyond product to install integrity, which is what commercial customers actually need.
Per zone, typically a week including cure before service. Larger facility-wide projects stretch with phased install. Schedule is in the quote.
Client reviews
What Abbotsford Clients Say About SikaFloor Systems
SikaFloor urethane in our chemical handling zone. Three years of daily exposure, no degradation. The matched system spec made the difference.
Q. A6
Industrial Operations, Abbotsford
★★★★★
ESD SikaFloor across our assembly zones. Resistance verified at install, documentation supports our customer audit. Real specialty system delivery.
Y. A6
Plant Manager, Chilliwack
★★★★★
SikaTop self-leveling to bring slabs flat for tile install. Tile contractor said it was the easiest substrate he had worked on in months. Trade coordination paid off.
Z. A6
Facility Director, Mission
★★★★★
They picked the right SikaFloor system for each zone in our multi-use facility, not one system everywhere. Better engineering, better outcomes.
X. A6
Operations Lead, Langley
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Abbotsford.
Describe your facility type, zone layout, and any specialty requirements. We'll recommend the matched SikaFloor system and send a written quote with timeline.
foundations
Cost & Planning