Skip to main content
Abbotsford & area concrete contractor · Free written estimates
(778) 601-9189

Residential · Floors

Durable Concrete Floors in Abbotsford for Every Room

Polished, epoxy, stained or micro-topping finishes transform living spaces into hard-wearing, allergen-free surfaces that last decades. We build them on new slabs or resurface existing concrete with self-leveling underlayment when needed. Every project begins with a free written estimate and a firm completion date.

  • Four finish systems to choose from
  • Works on new or existing slabs
  • Written estimate, guaranteed timeline

Surface prep

Why Concrete Floor Prep Determines the Finish

A polished, epoxy, stained or micro-topping finish is only as good as the slab beneath it. Uneven surfaces, cracks and moisture issues show through any finish, so we address the base first.

We grind, repair and assess the existing concrete for flatness and moisture. When the slab is out of tolerance, self-leveling underlayment brings it into spec before the finish layer. If radiant heating is part of the plan, heated floor underlayment encases the tubing in the same step.

Once the slab is flat and sound, we apply the finish: polished concrete for brightness and durability, epoxy coating for seamless protection, stained concrete for colour and warmth, or a micro-topping overlay to resurface tired concrete without demolition.

Recent work
polished concrete floor in a modern Abbotsford kitchen
polished concrete floor reflecting light in a Abbotsford living room

Installation sequence

How Concrete Floor Installation Happens in Abbotsford

  1. Inspect and measure the slab

    We evaluate the existing concrete for moisture, damage, flatness and any coatings that need removal, then recommend the right finish and prep strategy.

  2. Grind, repair and level

    We grind or shot-blast the surface, patch cracks and damage, and pour self-leveling underlayment where the slab is uneven or out of tolerance.

  3. Install the finish system

    We apply the chosen finish (polished, epoxy, stain or micro-topping) in full coats per manufacturer specs, from primer through topcoat, building a durable system.

  4. Cure and hand off

    The finish cures fully, we walk the floor with you, and you receive care instructions to keep the concrete looking new for years.

Finish selection

Choosing the Right Concrete Floor Finish for Your Space

The room and your lifestyle determine the best finish. Polished concrete works well for open-concept living areas and basements, delivering a bright, hard surface that is easy to clean. Epoxy coating suits utility rooms and workshops, offering seamless, chemical-resistant protection.

Stained concrete brings warmth and depth to kitchens and sunrooms with acid or water-based dyes, while a micro-topping overlay refreshes an old, sound slab without tearing it out. All four systems are low-maintenance, allergen-free and built to last.

Schedule your estimate
polished concrete floor in a luxury Abbotsford living room
4 Finish types available
Decades Expected lifespan
4.9★ Homeowner rating

Homeowner questions

Concrete Floor Questions Answered

Finishes, prep, cost and living with concrete in Abbotsford homes.

We finish concrete floors polished, epoxy-coated, stained or with a micro-topping overlay, plus the self-leveling and heated-floor underlayment prep that goes underneath them.
Yes. Most residential floor work is done over an existing slab. We assess it for moisture, cracks and flatness, grind or repair as needed, and pour self-leveling underlayment if the surface is out of tolerance before the finish.
They are no colder than tile and pair well with radiant heat encased in heated-floor underlayment. They are hard, which is also why they are durable, low-maintenance and allergen-free, with no grout lines or carpet to hold dust.
Concrete floor finishes generally run $6 to $15 per square foot depending on the finish, the slab condition and how much prep or underlayment is needed. We confirm it with a written, itemised quote after seeing the slab.
We grind or shot-blast the surface and pour self-leveling underlayment where the slab is uneven. A finish only looks as good as the slab under it, so flat comes before anything decorative.

Homeowner reviews

What Abbotsford Homeowners Say About Their Concrete Floors

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

Polished the whole main floor after a reno. It is bright, dead easy to clean, and the self-leveler they poured first means there is not a single high spot.

V. S.
Abbotsford
★★★★★

Epoxy floor in the basement utility room. Seamless, wipes clean, and they built it up in proper coats instead of one quick layer.

D. A.
Langley
★★★★★

Stained the kitchen floor a warm brown. The colour has depth you do not get from tile, and there are no grout lines to scrub.

M. R.
Mission
★★★★★

Micro-topping over an old cracked slab in the sunroom. New seamless surface for a fraction of a tear-out, and you cannot tell what was underneath.

E. T.
Maple Ridge

Next steps

Get Your Free Concrete Floor Estimate

Describe the room and finish you envision. We assess the slab, recommend the right system and prep, and deliver a written, itemised quote within one business day.

We'll evaluate the slab and send a written floor quote within one business day.