Concrete Floors Built for Manufacturing in Abbotsford
Your factory floor takes a beating. Forklifts, dropped parts, chemical spills, static-sensitive assembly lines, dust control in clean rooms. We pour and coat concrete slabs that stand up to what your process demands, then schedule the work so production never stops.
Concrete Floors That Survive the Manufacturing Environment
A manufacturing floor is not just a surface. It absorbs impact from equipment, resists chemical attack, controls static discharge, and stops dust from contaminating your product. The concrete slab and its coating system have to work together as one piece of equipment.
Each system is engineered to your specific conditions, then installed with the prep and curing discipline that keeps it performing. That is how we build industrial concrete in Abbotsford.
Recent work
Installation sequence
How We Install Manufacturing Concrete Floors
Assess the process
We walk the floor with your team, document loads, chemical exposure, static or dust requirements, and identify the compliance or cleanliness standard the slab must meet.
Prepare the concrete
Existing slab gets ground, shot-blasted, or scarified. We repair cracks and spalls, pour self-leveling where needed, so the coating bonds to sound concrete.
Apply the system
We install the matched system: heavy-duty pour, chemical-resistant topcoat, ESD grounding layer, or dust-proof sealer, following the manufacturer spec from primer through final coat.
Cure and handoff
Each zone cures to spec, gets tested and marked with the date it carries traffic. You receive the maintenance schedule and documentation so the floor stays certified.
Four system options
Heavy-Duty, Chemical, Static & Dust Control
Not every manufacturing floor faces the same demands. A fabrication shop needs impact resistance; a chemical plant needs acid and alkali protection; an electronics line needs static dissipation; a clean room needs dust control. We match the system to the room.
Process loads, chemicals, static and dust requirements for industrial manufacturing concrete in Abbotsford.
By matching it to the process. We confirm loads, chemicals, static or dust requirements and the cleanliness or compliance standard, then choose between heavy-duty, chemical-resistant, ESD or dust-proof systems.
Yes. A heavy-duty slab with a chemical-resistant coating handles both, the slab takes the impact and load, the coating sheds the spills. We engineer the combination to your specific chemistry.
ESD flooring is a grounded floor system that dissipates static electricity. Electronics, pharmaceutical and battery operations need it because a static discharge from a normal floor can damage products or trigger an event.
Usually. We phase the work cell by cell or shift the schedule to off-hours, so production keeps running while one area cures. The phasing plan is built with you before the first prep.
It depends on the room. Dust-proof sealing closes the slab against airborne dust at a fraction of a full coating's cost. Where chemicals, impact or static are also factors, the room needs a full system.
Client reviews
What Abbotsford Manufacturers Say About Their Plant Floors
Describe the process, the loads, chemicals, static or dust control you need, and we will engineer a concrete floor system, prepare a detailed estimate, and send it to you within one business day.
foundations
Cost & Planning