Skip to main content
Abbotsford & area concrete contractor · Free written estimates
(778) 601-9189

Residential · Driveways

Durable Concrete Driveways Built for Abbotsford Winters

Your driveway takes the heaviest traffic and harshest weather on the property. We excavate and compact the base to shed water and carry load, pour the slab at the right thickness with air-entrained mix, and finish it broom, exposed-aggregate, stamped or coloured. New installations, full replacements, widenings, all backed by a free written estimate.

  • Properly compacted base for drainage
  • Broom, exposed, stamped or coloured finish
  • Free written quote, guaranteed finish date

The build sequence

Why Driveway Concrete Fails (and How We Prevent It)

Most driveway problems start underground. When the base is not compacted or drains poorly, the slab settles unevenly, frost heave lifts it in winter, and freeze-thaw cycles crack it from the inside out. We excavate to proper depth, lay and compact a granular base in lifts, and confirm drainage before any concrete arrives.

The pour itself matters just as much. We use an air-entrained mix designed to flex through British Columbia's temperature swings, pour at the right thickness for the vehicles using it, and saw-cut control joints on a planned grid so shrinkage cracks follow a clean line instead of random fractures.

After the cure, sealing the driveway keeps de-icing salt and water from penetrating the surface. The same crew that pours your driveway can also handle sidewalks, patios, and garage floors around the property.

Get a free estimate
Recent work
newly poured concrete driveway at a grey Abbotsford home
concrete driveway at a ranch-style Abbotsford home with double garage

Step by step

How We Install Concrete Driveways in Abbotsford

  1. Remove old slab and excavate

    The old concrete is broken up and hauled away. We excavate to the correct depth and check the grade so water runs away from the house and foundation.

  2. Compact the base and set forms

    Granular base material is laid in lifts and compacted with a plate compactor. Forms are set and stringed to the finished slope and elevations.

  3. Place and finish the concrete

    Air-entrained concrete is placed, screeded flat, and finished to your choice: broom, exposed-aggregate, stamped, or coloured.

  4. Cut joints and cure

    Control joints are saw-cut on a planned layout. The slab cures, and we provide the walk-on and drive-on dates at handoff.

Aesthetic choices

Selecting a Driveway Finish for Your Home

The finish is where your driveway's personality shows. A brushed finish is the workhorse: affordable, slip-resistant, and simple to maintain through winter salt and snow.

Exposed aggregate washes away the surface paste to reveal the stone, giving texture and grip. Stamped concrete presses a pattern into the fresh slab that mimics flagstone, slate, or brick. Coloured concrete uses integral pigment or hardener to tint the slab to match your home's trim and exterior. We bring finish samples to every estimate so you see them in natural light before committing.

Compare driveway finishes
finished concrete driveway with parked car at an Abbotsford residence
4 Finish styles
15+ Years experience
7 days Light traffic ready

Common questions

Driveway Concrete Questions, Answered

Pricing, base preparation, finish options and cure timing for Abbotsford driveways.

Several things: the finish, the slab thickness, the base condition, site access, and how much old concrete has to come out. A broom-finish driveway generally runs $9 to $14 per square foot in Abbotsford, with stamped, exposed-aggregate or coloured finishes higher. Every quote is written and itemised after an on-site measure.
Yes. We handle tear-out of the old slab, haul-away, excavation and re-grading, then rebuild the gravel base before any forms go down. Driveway repair and resurfacing is also an option when the slab is structurally sound.
Most Abbotsford residential driveways are poured at four inches over a compacted granular base, stepped up where heavier vehicles park or turn. We confirm the thickness and any reinforcement on the site visit based on use and soil.
You can usually walk on it within 24 to 48 hours. Wait about seven days before light vehicle traffic and 28 days for full design strength. We give you the exact cure schedule at handoff.
Broom and exposed-aggregate finishes shed water and hide wear well; stamped and coloured finishes look sharper and want resealing every few years. Sealing is what keeps salt and water out of any finish.

Homeowner reviews

What Abbotsford Homeowners Say About Their Concrete Driveways

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

Old driveway was heaved and cracked corner to corner. They rebuilt the base properly and the new broom-finish slab has stayed dead flat through a full winter.

P. D.
Abbotsford
★★★★★

Went with exposed aggregate and it looks sharp. The crew brought samples to the estimate so we knew exactly what we were getting before the pour.

R. H.
Chilliwack
★★★★★

Widened the driveway for a second vehicle and tied it into the original cleanly. You would not know it was two pours, the colour and finish match.

A. M.
Langley
★★★★★

Quoted a resurface instead of a full tear-out because the slab was still sound. Saved us money and they were upfront about it from the first visit.

T. G.
Mission

Ready to start

Schedule Your Free Driveway Estimate

New installation, full replacement or a widening, tell us the vehicles and the look you want and we will set up a free site visit with a written quote and a firm finish date.

We'll measure the driveway and send a written quote within one business day.