Tile Stays Dry: Laticrete Waterproofing in Abbotsford
Shower walls, wet-room floors, and stone tile assemblies need a waterproofing layer that bonds to both the substrate below and the finish above. Abbotsford Concrete installs Laticrete Hydro Ban and 9235 systems with matched underlayments, engineered as one complete slab-to-tile chain. Call for a free written estimate.
Matched Laticrete underlayments for flat substrate
Free written estimate, firm schedule
The assembly that holds
Why Laticrete Waterproofing Matters
Tile and stone don't fail because of the tile. They fail because water gets behind it. A waterproofing membrane stops that. Laticrete Hydro Ban is a liquid-applied barrier that turns a shower wall or wet floor into a sealed slab, then tile bonds into a Laticrete thinset that grips the membrane itself.
Below the membrane, a Laticrete underlayment gets the substrate flat and ready. The chemistry is matched so each layer bonds to the next, not just sitting on top. This is the same one-system approach we use with Sika and BASF products.
When you mix brands, you get layer-boundary failures. When you stay in one family, the concrete slab, underlayment, membrane and tile all work as a single assembly. That is what a basement renovation or shower install needs to last.
On the job
How we build it
Installing Laticrete Waterproofing Step by Step
Assess the wet area and pick the system
We evaluate the substrate, the use (shower, wet room, below-grade), and the tile layout. Hydro Ban liquid membrane works for most applications. The 9235 fabric-reinforced system adds reinforcement at corners and movement joints where extra durability is needed.
Prepare and level the substrate
The concrete slab or substrate is cleaned and prepped. A matched Laticrete underlayment is applied to bring the surface flat and create a sound base for the waterproofing membrane to bond to.
Apply the waterproofing membrane
Hydro Ban or 9235 is applied at the manufacturer-specified thickness. Seams, corners, drains and curbs are detailed carefully. The membrane is flood-tested where the assembly requires it to confirm watertightness.
Set tile into Laticrete thinset
Tile or stone is set into a Laticrete thinset mortar that bonds directly into the waterproofing membrane. The finish and the membrane become one continuous system, with no air gaps or layer failures.
Two products, one purpose
Hydro Ban vs. 9235 Fabric-Reinforced
Hydro Ban is the liquid-applied waterproofing membrane that seals showers, wet rooms and below-grade tile assemblies. It flows into corners and seams, creating a continuous barrier. For most residential and commercial tile work, Hydro Ban is the right choice.
The 9235 fabric-reinforced system adds a woven reinforcement layer at high-stress points: corners, movement joints, and transitions where the slab meets a wall or curb. We specify 9235 when the assembly has complex geometry or when the tile layout demands extra durability. Both systems use the same Laticrete underlayment family beneath them, so the warranty and performance are unified.
Hydro Ban vs 9235, waterproofing tile assemblies, and matched underlayments in Abbotsford.
Hydro Ban is a liquid-applied waterproofing membrane for showers, wet rooms and below-grade tile assemblies. It seals the substrate, then tile or finish sets into a Laticrete thinset that bonds into the membrane.
The 9235 fabric-reinforced system adds reinforcement at corners, movement joints and detailed transitions where liquid alone is not enough. We pick based on the specific assembly.
Usually yes. A matched Laticrete underlayment brings the substrate flat and bonds chemically to the membrane above, removing the layer-boundary failure mode you get from mixing brands.
Yes. Hydro Ban and 9235 are designed for shower assemblies and are widely specified for wet rooms, with proper detailing at drains, corners and curbs as part of the install.
We install Laticrete systems to the published manufacturer spec, with primer, membrane and tile-setting products from the same family, so the warranty is intact and the assembly performs.
Client reviews
What Abbotsford Clients Say About Their Laticrete Installs
A shower that needs to stay dry, a wet-room floor, or a tile assembly built to last, tell us the project and we will spec the right Laticrete waterproofing system and send a written quote.
foundations
Cost & Planning